RedMax
RedMax Chainsaw Protective Pants 592805105 | XXL 44-46 x 32 | New
RedMax Chainsaw Protective Pants 592805105 | XXL 44-46 x 32 | New
Couldn't load pickup availability
RedMax Chainsaw Protective Pants XXL | Part # 592805105 | New
Genuine RedMax chainsaw protective pants in size XXL, 44-46 inch waist by 32 inch inseam. Full leg protective trousers are what most professional crews move to once they are tired of buckling chaps on and off, and they give coverage that apron chaps cannot reach. This is the RedMax dealer part number 592805105, listed in the Husqvarna Group parts system as Rmax Prot Pant.
RedMax protective pants are built on the shared Husqvarna Group Classic protective pant specification. The published Husqvarna Classic chainsaw pant spec sheet states 5 layers of certified chainsaw protective material and lists ASTM F1897 (US), ANSI Z133.1, UL Certified and OSHA compliance. We could not pull a RedMax branded spec sheet for part number 592805105 to confirm those markings are printed on this specific garment, so we are reporting the shared Husqvarna Group specification rather than asserting a certification for this part number. If a specific standard is a job site or employer requirement, read the label sewn into the pants on arrival before you put them into service.
Specifications
- Part #: 592805105
- Husqvarna Group Part Description: Rmax Prot Pant - XXL/44-46 X 32
- Brand: RedMax (Husqvarna)
- Type: Chainsaw protective pants, full leg
- Size: XXL
- Waist: 44-46 inches
- Inseam: 32 inches
- Shared Spec Sheet: Husqvarna Classic chainsaw pant. That published spec sheet states 5 layers of certified chainsaw protective material and lists ASTM F1897, ANSI Z133.1, UL Certified and OSHA standards. Not independently confirmed as printed on this RedMax part number - verify the sewn-in label.
- Chain Speed Rating: Not published for this part number, so it is not listed here
- Condition: New
Key Features
- Full leg coverage Protective trousers cover ground that apron chaps leave open, and there is nothing to buckle on each time you pick the saw back up.
- Built to the Husqvarna Group Classic pant specification The Classic pattern is the volume protective trouser in the Husqvarna Group range, with rear leg ventilation, reinforced knees and a lightweight build aimed at all day wear rather than short bursts.
- True to size waist and inseam Sized 44-46 inch waist by 32 inch inseam so you can order against a tape measure instead of guessing off a small, medium, large chart.
- Genuine RedMax part number The garment a RedMax dealer supplies against 592805105, not a generic import with an unknown protective pad.
Care and Washing
Chainsaw protective garments rely on long loose fibre pads that jam a moving chain. Heat, bleach and mechanical abuse degrade those fibres, and a degraded pad does not stop a chain. Read this before the first wash.
- Machine wash at the temperature printed on the garment label. Do not wash the garment inside out.
- Close every zipper, snap and fastener before washing so the hardware does not abrade the protective panel.
- Do not use chlorine bleach.
- Do not dry clean. Dry cleaning solvents attack the protective layers.
- Do not tumble dry. Stretch the garment back to shape and air dry only, away from direct heat.
- Iron on low heat only, and never press directly on the protective panel.
- Wash immediately if the garment is contaminated with fuel, bar oil or any other flammable material.
- Inspect the protective panel every time you wear the pants. Retire the garment if the pad is cut, torn, exposed or contaminated. Never patch, sew through or repair a protective panel.
Compatibility
This is personal protective equipment. It is sized to the person wearing it, not to a machine, so there is no saw model or engine model fitment list and we do not publish one. Measure the wearer and match the size chart above before ordering. Protective leg wear should be worn with the rest of the standard chainsaw kit: helmet with face screen, hearing protection, gloves and cut resistant boots.
Why Buy OEM?
With protective clothing you are buying a claim about what happens in the half second after a chain touches your leg, and that claim is only worth what the manufacturer behind it is worth. Genuine RedMax pants are made to a Husqvarna Group specification with a controlled protective pad, stitching that survives repeated laundering and hardware that does not fail mid season. Unbranded copies commonly under fill the pad and cannot be traced back to anyone when it matters.
Why Buy From SWI Outlet Store
- ✔ Genuine RedMax OEM part number 592805105
- ✔ Size XXL, 44-46 inch waist by 32 inch inseam, confirmed against the Husqvarna Group part description
- ✔ Built on the shared Husqvarna Classic protective pant specification
- ✔ Full care and washing guidance included so the protective layers are not ruined on the first wash
- ✔ Honest listing - shared spec sheet reported, no unverified certification claimed
- ✔ Packed and shipped from our US warehouse
- ✔ Fast Shipping - Ships Quickly from the USA
Keywords
592805105, RedMax chainsaw pants, chainsaw protective pants, XXL chainsaw pants, 44-46 waist chainsaw trousers, RedMax PPE, logging pants, arborist pants, chainsaw safety trousers, Husqvarna Classic pant spec, chainsaw leg protection
Important
Verify size and fit before purchase using the waist and inseam figures listed above. Protective clothing reduces the risk and severity of an injury and buys the operator reaction time. It does not make a chainsaw safe and it is not a substitute for correct saw handling, training and technique. Always follow the safety instructions in your chainsaw operator manual.
Share
