Jonsered 3/8" Low Profile Chain File Kit 581805201 | 5/32 Round File | New

Jonsered (Husqvarna) Chainsaw File Kit for 3/8 in Low Profile Chain | Part # 581805201 | New

A complete hand filing kit for 3/8 in low profile saw chain, the pitch used on most small and mid size homeowner chainsaws and on many top handle saws. The kit puts the round file, the flat file and the handle together in one package so you can sharpen the cutters and dress the depth gauges without buying pieces separately. Genuine Husqvarna Group part supplied under the Jonsered brand.

Specifications

• Part #: 581805201
• Husqvarna Part Description: JON FILE KIT 3/8
• Also Listed As: Low Profile File Kit (3/8)
• Brand: Jonsered (Husqvarna)
• Chain Pitch: 3/8 in low profile (3/8 LP)
• Round File Size: 5/32 in (4.0 mm)
• Replaces: 504981669
• Condition: New

What's Included

• 5/32 in (4.0 mm) round file for sharpening the cutters on 3/8 in low profile chain
• Flat file for dressing the depth gauges
• File handle

Key Features

• Matched to 3/8 in low profile chain The 5/32 in round file is the correct diameter for 3/8 LP cutters. Using an oversize file rolls the top plate over and using an undersize file hooks the gullet, and either one ruins how the chain cuts.
• Cutter and depth gauge in one kit The round file sharpens, the flat file takes the depth gauges back down once the cutters have been shortened. Sharpening without ever touching the rakers is the most common reason a hand filed chain stops pulling chips.
• Field serviceable sharpening Hand filing takes minutes at the stump and keeps a chain cutting all day, rather than running a dull chain until you can get back to a bench grinder.
• Genuine Husqvarna Group part Jonsered branded, supplied through the Husqvarna Group parts system, made in Sweden.

Compatibility

Intended for 3/8 in low profile saw chain, on any brand of chainsaw running that pitch. Filing equipment is matched to chain pitch and cutter size, not to the saw model, so confirm the pitch of the chain actually on your saw before ordering. The pitch is normally printed on the chain drive link, on the guide bar, or in the specification table of your operator's manual.

Cross-Reference

• Replaces: 504981669

Why Buy OEM?

File diameter is not a rough guide, it is a dimension. A genuine kit gives you a round file cut to the correct 5/32 in diameter with a consistent tooth pattern, so the file bites instead of skating and the cutter geometry stays where the chain designer put it. Cheap files lose their bite in a few cutters and start polishing the tooth rather than cutting it.

Why Buy From SWI Outlet Store

• ✔ Genuine Jonsered / Husqvarna Group OEM file kit
• ✔ Correct 5/32 in round file for 3/8 in low profile chain
• ✔ Round file, flat file and handle in one package
• ✔ Sharpens cutters and dresses depth gauges
• ✔ Brand new, factory packaged
• ✔ Fast Shipping - Ships Quickly from the USA

Keywords

581805201, Jonsered file kit, Husqvarna file kit, 3/8 low profile file kit, 3/8 LP chain sharpening, 5/32 round file, chainsaw sharpening kit, chainsaw file and handle, 504981669, depth gauge flat file, picco chain file kit

Please confirm the pitch of the chain on your saw before purchasing. This kit is for 3/8 in low profile chain only. Kit contents are listed as supplied by Husqvarna Group dealer sources; if the exact number of round files in the package matters to you, message us before ordering and we will open the shelf stock and confirm.