Husqvarna 60" Standard Lift Fusion Blade 539119873 | Dixon ZTR | New

Husqvarna 60" Standard Lift Fusion Blade - Part #539119873 - New

This is the genuine Husqvarna Group 60 inch standard lift Fusion blade, part number 539119873, for Dixon zero turn decks. Standard lift is the everyday profile for dry conditions and side discharge, pulling less power from the engine than a high lift blade on a wide deck. Sold as a single new blade.

Specifications

• Part Number: 539119873
• Also Known As: Dixon 13958
• Brand: Husqvarna (Husqvarna Group OEM, supplied for Dixon branded equipment)
• Manufacturer Description: 60" Std Lift Fusion Blade
• Size Designation: For 60 in cutting deck
• Lift Type: Standard Lift
• Fusion Coating: Yes, Fusion series blade as designated by the manufacturer
• Center Hole, Outer Holes and Thickness: Not published by the manufacturer for this part number. Measure your existing blade or check your parts diagram before ordering.
• Quantity: Sold individually, one blade
• Condition: New

Key Features

• Standard Lift Profile Less airflow than high lift means lower power draw and less dust blowout in dry or sandy conditions, while still clearing clippings through the discharge.
• Fusion Series Construction The manufacturer designated Fusion version of the 60 inch standard lift blade, carrying its own part number.
• Commercial Deck Sizing Built for the 60 inch deck class where blade balance has a direct effect on cut quality and spindle bearing life.
• Factory Pre-Sharpened Ships sharpened with protective paint over the cutting edge that wears off during the first cut.

Compatibility

Confirmed fitment: 60 inch Dixon zero turn decks. Confirmed to supersede Dixon 13958.

Fitment above is limited to what the manufacturer and OEM dealer catalogs confirm for this part number. No other deck or model fitment is claimed here. Always confirm this part number against the parts diagram for your model and serial number before ordering.

Cross-Reference

This blade supersedes the following OEM part numbers within the Husqvarna Group parts system:

• Dixon 13958 (legacy Dixon part number)

Why Buy OEM?

A genuine Husqvarna Group blade is built to the factory print for length, center hole and mounting pattern, so it seats correctly on the spindle and stays in balance at full tip speed. An out of balance or mismatched blade puts load straight into the spindle bearings and the deck, and an incorrect center hole is a genuine safety hazard on a rotating component. OEM steel and heat treatment also hold an edge to the tolerance the deck was designed around.

Why Buy From Us

• ✔ Genuine Husqvarna Group OEM part, not aftermarket
• ✔ Brand new, never installed
• ✔ Correct factory dimensions and mounting pattern
• ✔ Sold individually so you can order the exact quantity your deck needs
• ✔ Currently supported OEM part number
• ✔ Fast Shipping - Ships Quickly from the USA

Keywords

539119873, Husqvarna 539119873, Dixon 13958, 60 inch mower blade, 60" standard lift blade, Fusion mower blade, standard lift Fusion blade, Dixon ZTR blade, zero turn mower blade, commercial mower blade, OEM Husqvarna blade

Important - Please Read Before Purchase

Verify compatibility before purchasing. Confirm part number 539119873 against the parts diagram for your exact model and serial number, and confirm blade length, center hole and mounting pattern against the blade currently on your deck. Blade fitment varies between production runs of decks that look identical. This item is sold as a single new blade and is not a set. If you are unsure, send us your model and serial number before you order.